1

00:00:01,020  -->  00:00:07,940
In the previous video, we have created a simple
python script for network automation on cisco router

2

00:00:08,320  -->  00:00:13,680
If you not sure that you understand
what we have covered in the previous video,

3

00:00:13,720  -->  00:00:20,500
I recommend you to back to that video and
play it again. But if you sure that you understand

4

00:00:20,500  -->  00:00:26,580
that topic, you can continue to this video.
In this video, we are going to learn how to

5

00:00:26,580  -->  00:00:29,660
doing network automation on mikrotik router.

6

00:00:30,120  -->  00:00:38,280
This is the code that we will use in this
video. I will also show you the code from the previous video

7

00:00:42,960  -->  00:00:46,400
Here we can see that we
don’t have many different.

8

00:00:46,940  -->  00:00:53,720
In the cisco code, we need to import time,
I already explained about time in the previous video

9

00:00:53,720  -->  00:00:58,180
But now, for mikrotik code, we don’t
need to import time

10

00:00:59,400  -->  00:01:06,240
Here we define the ip address, username, and
password of the mikrotik router. We call SSH

11

00:01:06,240  -->  00:01:12,260
Client function from paramiko and then we
connect to the mikrotik router using the ip

12

00:01:12,260  -->  00:01:19,380
address, username, and password that we have
defined before.

13

00:01:21,560  -->  00:01:27,500
The different between this two script is,
that we need to invoke shell in the cisco router

14

00:01:27,860  -->  00:01:34,180
but we don’t in the mikrotik router.
Also the keyword to send the command to the

15

00:01:34,180  -->  00:01:41,640
cisco router is send, but in mikrotik we use
exec_command. And we don’t need to delay

16

00:01:41,640  -->  00:01:48,040
the program in mikrotik, but in cisco, we
must sleep the program or the command will

17

00:01:48,040  -->  00:01:50,640
not send to the router successfully.

18

00:01:51,040  -->  00:01:54,660
Don’t forget to always close the ssh session.

19

00:01:54,660  -->  00:02:06,880
Save the code, open a command prompt, see
that we are in the right directory

20

00:02:07,440  -->  00:02:13,260
Here we can see that we have script2.py. Let’s run
the code.

21

00:02:20,760  -->  00:02:29,760
Okay, we have successfully run the code, In this example code, we will create
a bridge interface in mikrotik

22

00:02:30,660  -->  00:02:36,400
and configure the ip address 10.2.2.1 to that bridge interface.

23

00:02:37,480  -->  00:02:42,360
Let’s go to mikrotik terminal and see if
the script is work.

24

00:02:48,800  -->  00:02:54,480
You can see that now we have bridge interface and new ip address
in the mikrotik

25

00:02:54,480  -->  00:03:02,920
Okay, now we are able to doing Network Automation
on Cisco & Mikrotik routers, In the next video,

26

00:03:02,920  -->  00:03:08,980
we will learn how to doing Network Automation
on Cisco & Mikrotik routers in one code.

27

00:03:08,980  -->  00:03:12,420
Thankyou for watching, and see you on the next
video!